LED Systems Group
LED  Systems Group

Please CONTACT US for details.

SIGN UP HERE for our Monthly Newsletter

Our Monthly Newsletter features:

  • New Product Introductions
  • Discount Offers
  • Technical Tips

LED Security & Landscape Lighting

Replace dim, high electricity use, corroded, incandescent, halogen lamps with:

COMMERCIAL GRADE, CORROSION RESISTANT, LOW POWER DEMAND


LED SPOT & FLOOD LIGHTING


  • Direct Replacement for Exterior Ground Units
  • Run Directly from your Existing Low Voltage 12VAC Power Supply
  • Uses Existing In-Ground Wiring

We offer 12 designs that vary in Light Output and Beam Pattern providing a wide range of system design options to create an infinite number of lighting environments.


These lamps are found in the LED Work & Spot Lamp Catalog Section.  The same lamps we recommend for Heavy Duty Construction and Industrial Equipment applications which are subject to extreme conditions such as weather, vibration, and the rigors of everyday field use. We have engineeried a robust mounting and positioning design for ground placement applications.  These products are far superior to typical landscape lamps and will serve you for many years without failure or deterioration in the modest home, industrial building, safety and landscape lighting environments.  

INDUSTRIAL GRADE


  • Super Flux High-Output LED's
  • Light Emitting Diodes 8-20 Output Watts
  • Low Voltage 9–36 VDC and 8-10 VAC Input
  • ONLY 0.5 Amps per lamp
  • 3.0 Amps total for 6 Lamps Use
  • Standard Low Voltage 12 VAC Power Supply
  • High Impact Polycarbonate Lens
  • Powder Coated Anti-Corrosion Aluminum Housing
  • Sealed Epoxy Encapsulated LED's and Electronics
  • Hard-Wired With Heavy Duty Jacket for Durability
  • 10 Inch Galvanized Steel Spike for Easy Install
  • Stainless Steel Brackets and Fasteners

INSTALLATION IS EASY


  • Replace Existing Incandescent or Halogen Lamps
  • 12VAC to 12 VDC converter reduces flicker
  • Heat Shrink Tubing provided for Sealing Splices

 

Four Easy Steps:

  1. Slide Heat Shrink Tube (HST) onto Wire
  2. Splice Lamp to Existing Low Voltage Wires
  3. Slide HST over Splice and Heat to Seal
  4. Push Stake into the Ground & Adjust Lamp

 

Hardware Allows for:

  • PIVOT UP or DOWN 
  • SWIVEL LEFT to RIGHT

VALUE PROPOSITION - PERFORMANCE - $$$
 

For Example - A 10 Watt LED Lamp:


Lumens (Brightness) are GREATER Than 50 Watt Halogen Lamp


Uses 80% LESS Electricity than 50 Watt Halogen Lamp


Lasts Up to 25 - 50 Times LONGER than a 50W Halogen Lamp


Has Lens Temperature of 70 deg F vs 270 deg F for Halogen


Dimmer Control Compatible - No damage to LED's



Pays for Itself Through:

 

  • Reduced Electrical Consumption
  • Eliminating Continuous Bulb Replacement Costs
  • Eliminating Paid Maintenance Services (where applicable)

SUPERIOR APPEARANCE
 

Halogen and Incandescent Lamps are Yellow

LED Lights are Similar in Color Output to Daylight

Cheap Landscape Lighting Lens Fade & Discolor

We use UV Stabilized Polycarbonate Lens Resin


Impact Resistance Versus Glass or Acrylic Lens
 
Greater Light Color Consistency and Output

BUILT TO LAST A LIFETIME

 


Standard Low Voltage Lighting Connections Corrode


Unprotected from the Elements they will Fail


Our Lamps are Fully Sealed with Epoxy Coatings


We Provide Heat Shrink Tubing to Seal the Wires


Powder Coated Housing is UV (Sun fade) Resistant


Stainless Steel Hardware Will Not Oxidize or Rust

SUPERIOR MATERIALS


 
Stainless Steel Bolts, Nuts, Washers and Brackets


Stainless Steel Hardware will not Rust or Oxidize


Solid Steel Galvaized Spike/Stake Easily Peirces Soil


No Hammer or Mallet needed to Press into ground


UV Resistant Powder Coated Aluminum Housing


Epoxy Sealed, Screwed & Bonded - Incredibly Durable


Print | Sitemap
Copyright 2004-2022 LED Systems Group